For contractors, consultants and distributors, Tecnomed acts as a single technical partner: system sizing, product selection, manufacturing, export documentation and commissioning support.
Send us architectural drawings and the room list. Our engineers calculate gas demand, propose plant sizes and produce a full bill of materials with product codes for every terminal unit, AVSU and plant component.
All equipment is manufactured in our Istanbul facility under one quality system and one warranty, packed for export and shipped with English documentation.
During installation we support your team remotely or on site, and after handover we supply spare parts and maintenance kits for every plant.
TEC51.19 The automatic medical gas manifold system is the cylinder-fed source of a hospital pipeline, supplying oxygen, nitrous oxide, nitrogen, carbon dioxide, medical air and mix gas. Two regulation stages drop cylinder pressure to a stable 4-5 bar line pressure, while duty and reserve banks change over automatically and a digital alarm unit reports line pressure and cylinder content.
TEC51.20 The Tecnomed medical air plant produces the sterile compressed air a hospital needs for ventilation and surgical use. Three screw compressors, compressed air tanks, refrigerated and desiccant dryers, four-stage filtration and a medical air regulator panel work together to deliver dry, oil-free, odour-free air at the pressure required by intensive care and operating theatres.
TEC51.21 The technical medical air plant is Tecnomed's economical alternative for facilities with a smaller bed count. A single screw compressor mounted over a horizontal receiver, with its own dryer, filter set and 4-7 bar regulator group, produces sterile air to medical standards in a compact footprint, and can be doubled as a redundant tank-over system or backed up with cylinders.
TEC51.22 The Tecnomed medical vacuum plant is the central suction source for patient rooms, intensive care units and operating theatres. Three vacuum pumps connected in parallel are run at equal time intervals by an equal-aging PLC control panel, negative pressure is stored in twin tanks and the line is protected by a double bacteria filter set before it reaches the wards.
TEC31.01 The Elegance zone service unit is a medical gas zone valve box for one to six gases including vacuum, built behind a sliding printed plexiglass cover. Analogue manometers, isolating valves, low pressure sensors and a gas alarm controller sit in one electrostatically painted carbon steel frame, manufactured to EN ISO 7396-1 and HTM 02-01.
TEC31.02 The Vexillum zone control unit is a galvanized steel medical gas zone valve box for one to six gases including vacuum, closed by a hinged cover with a lock. Separate analogue manometers, isolating valves and low pressure sensors serve each gas, and the Multi Alarm X display is read through the cover window. Built to EN ISO 7396-1 and HTM 02-01.
TEC31.03 The Stainless zone control unit is a medical gas zone valve box built entirely from stainless steel, for areas where hygiene, cleaning regimes or humidity rule out a painted body. It monitors the pressure of each gas service in the area and cuts the gas flow in an emergency, manufactured to EN ISO 7396-1 and HTM 02-01.
TEC31.04 The Multi Alarm X medical gas alarm unit gives an audible warning when pipeline pressures move outside their limits and shows every monitored gas on an LCD screen. It generates separate high and low pressure alarms per gas, both high priority, and transmits pressure values, limit settings and alarms to the automation system over RS485/Modbus.
TEC11.01 The Vexillum bed head unit is Tecnomed's core patient room bedhead: a rounded aluminium profile carrying medical gas outlets, mains and UPS sockets, a data socket, LED reading and room lighting and nurse call provision. It is produced to EN 11197 and offered in Carbon, Stone, Wood, Gold, Chrome and Texture finishes as well as graphic printed cover designs.
TEC11.02 The Clarail bed head unit takes the Vexillum profile and adds a full-length accessory rail along the lower edge, so monitors, pumps and rail-mounted equipment can be carried directly on the bedhead. It is produced to EN 11197 with medical gas outlets, mains and UPS sockets, data socket and LED reading and room lighting.
TEC11.03 The Twin bed head unit uses a double aluminium body channel with side composite lighting channels, so it can carry more medical gas services and more electrical services than a single-channel bedhead. Its wide body suits broad walls, and gas and electricity pass through fully separate channels. Manufactured to EN 11197.
TEC11.04 The Unique series bed head unit is Tecnomed's premium VIP room wall system, designed to hide medical gas, lighting and electrical services inside a luxury profile. Options include a touch control panel, control hand remote, lighting dimmer, diffused visual lighting, illuminated front cover and UV printed or hospital-branded covers. Manufactured to EN 11197.
TEC21.02 The motorized double arm three joint pendant is Tecnomed's widest-reaching ceiling supply unit for operating theatres and high-dependency intensive care. Two arms and three articulated joints move the service head freely around the table, while the motorized column sets outlets, sockets and instrument trays at the working height the team actually needs.
TEC21.01 The motorized single arm double joint pendant is a compact ceiling supply unit for intensive care beds and smaller theatres. One arm and two joints give the service head a controlled swing around the bed, and the motorized column adjusts working height electrically while carrying the same standard socket, grounding and rail package.
TEC21.03 The non-motorized single arm double joint pendant is a fixed-height ceiling supply unit for bed spaces that need gas, power and data overhead without electrical height adjustment. One arm and two joints let the head be swung around the bed and parked clear, while the standard socket, grounding and rail package stays the same.
TEC21.04 The non-motorized double arm three joint pendant combines the widest reach in the TEC21 range with a fixed service height. Two arms and three joints let the head travel right around the table or bed, while the standard package of sockets, grounding points and rail racks matches the motorized versions exactly.
Send us your drawings or bill of quantities. Our engineers reply with a technical proposal, usually within the same week.
