medical gas plants
How Does a Medical Gas Manifold Work? Automatic Changeover Explained
How a medical gas manifold works: duty and standby cylinder banks, automatic changeover, pressure stages, alarm signals and sizing for hospitals.
Read more Medical gas systems manufacturer · Istanbul, Türkiye
Complete medical gas pipeline systems for hospitals
From the source plant to the patient bedside: medical gas plants, area valve service units, gas outlets, bed head units and pendants – designed, manufactured and tested by Tecnomed to EN ISO 7396-1 and HTM 02-01.
- 45+countries served
- 65products
- 300+product models
- 100%leak tested
EN ISO 7396-1 · HTM 02-01
One supplier for the whole medical gas pipeline
Every stage of the hospital medical gas system, from one manufacturer with one warranty.
- 01 Source Manifolds, medical air and vacuum plants, PSA oxygen generators, LOX tanks
- 02 Distribution Area valve service units, alarm panels, second stage regulators, copper pipe
- 03 Terminal Medical gas outlets in DIN, BS and AFNOR standards, wall modules, probes
- 04 Patient Bed head units, ICU units, pendants, flowmeters, regulators, nurse call
Products
Product categories
Eight product groups, more than 60 product families, hundreds of configurable models.
Solutions
Solutions by hospital department
Equipment packages designed around how each department actually works.
01
Hospital Medical Gas Pipeline Systems
A medical gas pipeline system delivers oxygen, medical air, vacuum, nitrous oxide, carbon dioxide, nitrogen and AGSS from central plant to every terminal unit in the hospital. Tecnomed supplies and sizes the whole chain.
Read more 02Intensive Care Unit Equipment
Intensive care beds need more gas outlets, more power and more equipment mounting than any other room. Tecnomed ICU units are configured per bed with the sockets, gas services and rails the unit actually uses.
Read more 03Operating Room Equipment
In the operating theatre, gas, power and equipment must reach the surgical team without cables on the floor. Tecnomed supplies ceiling pendants, AGSS, operating lamps and OR terminal units.
Read more 04Patient Room Equipment
The bed head unit is the one piece of medical equipment every patient sees. Tecnomed combines gas outlets, electrical services, reading and room lighting and nurse call in units that match the hospital's interior design.
Read more 05Hospital Oxygen Supply Solutions
Oxygen is the most critical medical gas. Tecnomed offers three source options – cylinder manifolds, liquid oxygen and on-site PSA generation – and combines them into a primary, secondary and reserve supply as required by EN ISO 7396-1.
Read more 06Turnkey Medical Gas Projects
For contractors, consultants and distributors, Tecnomed acts as a single technical partner: system sizing, product selection, manufacturing, export documentation and commissioning support.
Read more Design
Design your patient room
Bed head units in carbon, stone, wood, gold, chrome and printed designs – matched to the hospital's interior.
Tecnomed
Why hospitals choose Tecnomed
01
Manufacturer, not a reseller
Every product is designed and produced in our Istanbul facility, so lead times, customisation and spare parts stay under our control.
02
Built to the standards buyers specify
EN ISO 7396-1, HTM 02-01, ISO 13485 and CE. Outlets and probes in DIN 13260-2, BS 5682 and AFNOR NF S 90-116.
03
Customised to the project
Sizes, colours, socket standards and gas services are configured for each hospital – from a single ward to a 1,000-bed complex.
04
Export experience in 45+ countries
Documentation, packaging and commissioning support for projects across the Middle East, Africa, Central Asia and Europe.
Knowledge Base
Latest from the knowledge base
medical gas plants
PSA Oxygen Generator vs Liquid Oxygen Tank: Which Suits Your Hospital?
Compare PSA oxygen generators and liquid oxygen tanks for hospitals: purity, capacity, footprint, logistics, running cost and backup supply rules.
Read more medical gas plants
How to Size a Medical Vacuum Plant for a Hospital
Learn how to size a medical vacuum plant: design flow, diversity factors, pump selection, receiver tank, bacteria filtration and redundancy rules.
Read moreFrequently asked questions
What does a complete hospital medical gas pipeline system include?
A medical gas pipeline system (MGPS) starts at the source – cylinder manifolds, medical air compressors, vacuum plants, PSA oxygen generators or liquid oxygen tanks – continues through copper pipework, area valve service units and alarm panels, and ends at the terminal units: medical gas outlets mounted in bed head units, ICU units, pendants or wall modules. Tecnomed manufactures every stage.
Which standards do Tecnomed medical gas products comply with?
Systems are designed and manufactured to EN ISO 7396-1 and HTM 02-01 under an ISO 13485 quality system and carry CE marking. Gas outlets and probes are available in DIN 13260-2, BS 5682 and AFNOR NF S 90-116; bed head units follow EN 11197 and copper pipe follows EN 13348.
Can Tecnomed supply a turnkey medical gas system for a new hospital?
Yes. We size the plant to the bed count and gas demand, supply all pipeline components and terminal units, and support installation and commissioning through our engineers or your local contractor.
Does Tecnomed export and which countries do you serve?
Tecnomed exports to more than 45 countries, with the strongest presence in the Middle East, Africa, Central Asia, Eastern Europe and South Asia. Export documentation, packaging and remote commissioning support are standard.
How do I get a quotation?
Send your drawings, bill of quantities or a simple list of rooms and gas services by WhatsApp, email or the quotation form. Technical proposals are normally returned within the same week.
Tecnomed
Planning a hospital medical gas project?
Send us your drawings or bill of quantities. Our engineers reply with a technical proposal, usually within the same week.