Intensive care beds need more gas outlets, more power and more equipment mounting than any other room. Tecnomed ICU units are configured per bed with the sockets, gas services and rails the unit actually uses.
Choose between horizontal wall units (Vexillum, Trio, Flash), the Na-Di bridge system with sliding pendentives, vertical columns (Sude, Vertical ICU) or ceiling pendants for maximum floor access.
Standard ICU units carry 6–12 mains sockets, 6–12 UPS sockets, grounding points, data sockets, nurse call and up to 8 gas outlets in DIN, BS or AFNOR standard. Monitor stands, infusion pump rails, baskets and accessory rails are integrated into the same profile.
Every unit is manufactured to EN 11197 with antibacterial RAL paint, and can be produced in project-specific lengths and finishes.
TEC11.01 The Vexillum bed head unit is Tecnomed's core patient room bedhead: a rounded aluminium profile carrying medical gas outlets, mains and UPS sockets, a data socket, LED reading and room lighting and nurse call provision. It is produced to EN 11197 and offered in Carbon, Stone, Wood, Gold, Chrome and Texture finishes as well as graphic printed cover designs.
TEC11.02 The Clarail bed head unit takes the Vexillum profile and adds a full-length accessory rail along the lower edge, so monitors, pumps and rail-mounted equipment can be carried directly on the bedhead. It is produced to EN 11197 with medical gas outlets, mains and UPS sockets, data socket and LED reading and room lighting.
TEC11.03 The Twin bed head unit uses a double aluminium body channel with side composite lighting channels, so it can carry more medical gas services and more electrical services than a single-channel bedhead. Its wide body suits broad walls, and gas and electricity pass through fully separate channels. Manufactured to EN 11197.
TEC11.04 The Unique series bed head unit is Tecnomed's premium VIP room wall system, designed to hide medical gas, lighting and electrical services inside a luxury profile. Options include a touch control panel, control hand remote, lighting dimmer, diffused visual lighting, illuminated front cover and UV printed or hospital-branded covers. Manufactured to EN 11197.
TEC21.02 The motorized double arm three joint pendant is Tecnomed's widest-reaching ceiling supply unit for operating theatres and high-dependency intensive care. Two arms and three articulated joints move the service head freely around the table, while the motorized column sets outlets, sockets and instrument trays at the working height the team actually needs.
TEC21.01 The motorized single arm double joint pendant is a compact ceiling supply unit for intensive care beds and smaller theatres. One arm and two joints give the service head a controlled swing around the bed, and the motorized column adjusts working height electrically while carrying the same standard socket, grounding and rail package.
TEC21.03 The non-motorized single arm double joint pendant is a fixed-height ceiling supply unit for bed spaces that need gas, power and data overhead without electrical height adjustment. One arm and two joints let the head be swung around the bed and parked clear, while the standard socket, grounding and rail package stays the same.
TEC21.04 The non-motorized double arm three joint pendant combines the widest reach in the TEC21 range with a fixed service height. Two arms and three joints let the head travel right around the table or bed, while the standard package of sockets, grounding points and rail racks matches the motorized versions exactly.
TEC61.xx.01-04 The DIN 13260-2 medical gas outlet is Tecnomed's terminal unit for hospitals standardised on German probe geometry. Seven gas services – oxygen, nitrous oxide, medical air 4 bar, surgical air 7 bar, vacuum, carbon dioxide and nitrogen – are covered in four connection variants and in both MC all-brass and PC brass-plus-ABS constructions, each one 100% leak tested before dispatch.
TEC61.xx.05-08 The BS 5682 medical gas outlet suits hospitals working to British practice and HTM guidance. Tecnomed supplies all seven gas services – oxygen, nitrous oxide, medical air 4 bar, surgical air 7 bar, vacuum, carbon dioxide and nitrogen – in 45° pipe, 90° pipe, 45° union and rear union versions, each available as MC all-brass or PC ABS-cover.
TEC61.xx.09-12 The AFNOR medical gas outlet covers hospitals built to French practice, common across francophone Africa, the Maghreb and parts of the Middle East. Tecnomed lists all seven gas services to NF S 90-116 in four connection variants – 45° pipe, 90° pipe, 45° union and rear outlet – on the same degreased brass lower body as the rest of the TEC61 range.
TEC61.xx.xx.EV Eva series medical gas outlets are Tecnomed's ergonomic, cost-efficient BS 5682 terminal units. Every part the gas passes through is M58 forged brass, while the housing uses ABS and glass-fibre reinforced engineering plastics. A wide upper head lets nurses release the probe with one finger. Five gas services are offered in four connection variants.
TEC41.01 The Tecnomed oxygen flowmeter with humidifier delivers measured oxygen from a wall or pendant terminal unit to the patient. A brass body carries a graduated flow tube and a detachable 200 ml polycarbonate humidification jar, giving precise flow up to 15 Lpm. Single, twin, hose-fed and all-metal versions are available with DIN, BS, AFNOR or AFROX probes.
TEC41.05 The Tecnomed oxygen cylinder regulator reduces high-pressure cylinder oxygen to a safe patient supply in hospitals, medical areas and ambulances. The chrome-plated brass body accepts up to 250 bar, reads 0-315 bar on the inlet manometer and delivers an adjustable outlet from 16 bar down to 0.2 bar, with single or double gauge and optional emergency outlet.
TEC41.06 A Tecnomed oxygen therapy device combines regulator, flowmeter and humidifier in one unit that regulates and humidifies the pressure coming from a high-pressure oxygen cylinder. The chrome-plated brass body accepts up to 230 bar, delivers 4-5 bar regulated output and 0-15 L/min adjustable flow, with a sterilisable polycarbonate humidifier bottle and optional emergency outlet.
TEC41.10 The Tecnomed vacuum regulator sets the suction drawn from the hospital central vacuum system at the point of care. A chrome-plated brass body carries an on-off valve, flow adjustment control and suction value indicator, and regulates from -250 mbar minimum to -1000 mbar maximum. Paediatric scaling, a trap jar and a Venturi version are available.
Send us your drawings or bill of quantities. Our engineers reply with a technical proposal, usually within the same week.
